Search for: * in Category: CLUTCH PARTS 16 Records Returned 10 Records Displayed. New Search

<< Previous | 1 | 2 | Next >> 1960-1965 6 CYLINDER CLUTCH KIT Category: CLUTCH PARTS Product ID: 07-008 Description: This is an 8 1/2 inch clutch kit designed to fit the 1960 - 1965 Ford Falcon equipped with the 144, 170 or 200 Cu. In. engine coupled to the 2.77 manual three speed transmission or Dagenham 4 speed transmission. This kit includes the clutch disc, pressure plate, throw out bearing with holder and the alignment tool. This kit Does Not include the Pilot Bushing. . Price:  $154.95 Quantity: 1963-1970 V-8 CLUTCH KIT Category: CLUTCH PARTS Product ID: 07-014 Description: This part is the 10 inch clutch kit for the V-8 equipped Ford Falcons. This is a diaphragm type pressure plate whereas the original was a finger type. This is the newer design. Price:  $119.95 Quantity: 1960-1965 LOCK WASHER FOR BLOCK PIVOT Category: CLUTCH PARTS Product ID: 34809-S8 Description: This part is used to keep the clutch equalizer bar block pivot tight. Price:  $0.25 Quantity: 1960-1965 BRAKE AND CLUTCH PEDAL BUSHINGS Category: CLUTCH PARTS Product ID: B7AZ-2471-A Description: This is the bushing that the brake and clutch pedal shafts ride on inside of the pedal support assembly. 4 each are required for automatic transmission equipped cars and 6 each are required for manual transmission equipped cars. Price:  $0.95 Quantity: 1960-1965 PILOT BUSHING - 6 CYLINDER Category: CLUTCH PARTS Product ID: C0DZ-7600-A Description: This is the pilot bushing designed to fit the 144,170 & 200 Cu. In. 6 cylinder engines. Price:  $7.49 Quantity: 1960-1965 CLUTCH PEDAL RETURN SPRING INSULATOR Category: CLUTCH PARTS Product ID: C1DZ-7A630-A Description: This Ford Falcon part goes on the end of the clutch return spring that is mounted up under the dash. It actually fits on the end of the spring that is attached to the clutch pedal. It helps keep the spring from squeaking against the clutch pedal. This Ford Falcon part fits 1960 - 1965 Ford Falcons. Price:  $8.00 Quantity: 1960-1965 EQUALIZER BAR REPAIR KIT Category: CLUTCH PARTS Product ID: C2OZ-7A531-K Description: This part is designed to save you money. It includes 2 each felt washers, 2 each nylon balls, 2 each retainers and the correct block pivot. This clutch equalizer bar repair kit will fit all 1960 - 1965 Ford Falcons equipped with a manual transmission. Price:  $17.95 Quantity: 1963 V-8 CLUTCH EQUALIZER BAR Category: CLUTCH PARTS Product ID: C3DZ-7528-A Description: This part will fit the 1960 - 63 with the 260 V-8 engine. It will not fit if a 289 or 302 engine is used as those engine blocks are wider. Price:  $69.95 Quantity: 1960-1965 6 CYLINDER CLUTCH FORK DUST SHIELD Category: CLUTCH PARTS Product ID: C3OZ-7513-A Description:  Price:  $12.00 Quantity: 1964 FORD FALCON CLUTCH EQUALIZER BAR Category: CLUTCH PARTS Product ID: C4DZ-7528-A Description: This is the clutch equalizer bar for the 260 Cu.In. engine in a 1964 Falcon. This part will not fit if a 289 or 302 engine is used as those engine blocks are wider. Price:  $69.95 Quantity: << Previous | 1 | 2 | Next >>

Home | Search | Current Order | Wish List