Search for: * in Category: ELECTRICAL PARTS 36 Records Returned 10 Records Displayed. New Search

<< Previous | 1 | 2 | 3 | 4 | Next >> 1960-1963 (EARLY) 6 CYLINDER BATTERY CABLE SET Category: ELECTRICAL PARTS Product ID: 60-62-FAL-BC-6 Description: This is a Set of the 3 required Battery Cables for the 1960-1963 (Early) Six Cylinder equipped Falcons. Included in this set is a 12 inch cable that attaches between the Positive Battery Terminal and the BAT Terminal on the Starter Solenoid. Also included is the 21 inch cable that attaches between the Starter Terminal of the Starter Solenoid and the Starter Motor. The third cable that is included is 19 inches long and attaches between the Negative Battery Terminal and the Ground Bolt on the Engine Block. The Battery Terminals on these cables are brass, as is original. Early vs. Late 1963 Ford Falcon As far as these Battery Cables are concerned, the location/position of the Battery Tray is the key to determining if the Falcon is an Early or Late 1963 Production Model. If the Battery Tray is Positioned Parallel to the Fender and Perpindicular to the Radiator Core Support it is an Early Production Falcon. If the Battery Tray is Perpindicular to the Fender and Parallel to the Radiator Core Support it is a Late Production Falcon. Price:  $49.95 Quantity: 1963 (LATE)-1964 6 CYLINDER BATTERY CABLE SET Category: ELECTRICAL PARTS Product ID: 63-FAL-BC-6 Description: This is a set of the 3 required Battery Cables for the 1963 ( Late)-1964 Six Cylinder equipped Falcons. Included in this set is a 13 inch cable that attaches between the Positive Battery Terminal and the BAT Terminal on the Starter Solenoid. Also included is the 24 inch cable that attaches between the Starter Terminal of the Starter Solenoid and the Starter Motor. The third cable that is included is 24 inches long and attaches between the Negative Battery Terminal and the Ground Bolt on the Engine Block. The Battery Terminals on these cables are brass, as is original. Early vs. Late 1963 Ford Falcon As far as these Battery Cables are concerned, the location/position of the Battery Tray is the key to determining if the Falcon is an Early or Late 1963 Production Model. If the Battery Tray is Positioned Parallel to the Fender and Perpindicular to the Radiator Core Support it is an Early Production Falcon. If the Battery Tray is Perpindicular to the Fender and Parallel to the Radiator Core Support it is a Late Production Falcon. Price:  $49.95 Quantity: 1963-1964 V-8 BATTERY CABLE SET Category: ELECTRICAL PARTS Product ID: 63-FAL-BC-V8 Description: This is a Set of the 3 required Battery Cables for the 1963-1964 V-8 equipped Falcons. Included in this set is a 13 inch cable that attaches between the Positive Battery Terminal and the BAT Terminal on the Starter Solenoid. Also included is the 36 inch cable that attaches between the Starter Terminal of the Starter Solenoid and the Starter Motor. The third cable that is included is 25 inches long and attaches between the Negative Battery Terminal and the Ground Bolt on the Engine Block. The Battery Terminals on these cables are brass, as is original. Price:  $49.95 Quantity: 1965 6 CYLINDER BATTERY CABLE SET Category: ELECTRICAL PARTS Product ID: 65-FAL-BC-6 Description: This is a Set of the 3 required Battery Cables for the 1965 6 Cylinder equipped Falcons. Included in this set is a 13 inch cable that attaches between the Positive Battery Terminal and the BAT Terminal on the Starter Solenoid. Also included is the 24 inch cable that attaches between the Starter Terminal of the Starter Solenoid and the Starter Motor. The third cable that is included is 24 inches long and attaches between the Negative Battery Terminal and the Ground Bolt on the Engine Block. The Battery Terminals on these cables are brass, as is original. It is also noted that the Battery Positive cable covering is Red and has a Red Rubber Boot installed to protect the Battery Terminal. Price:  $49.95 Quantity: 1965 V-8 BATTERY CABLE SET Category: ELECTRICAL PARTS Product ID: 65-FAL-BC-V8 Description: This is a Set of the 3 required Battery Cables for the 1965 V-8 equipped Falcons. Included in this set is a 13 inch cable that attaches between the Positive Battery Terminal and the BAT Terminal on the Starter Solenoid. Also included is the 36 inch cable that attaches between the Starter Terminal of the Starter Solenoid and the Starter Motor. The third cable that is included is 25 inches long and attaches between the Negative Battery Terminal and the Ground Bolt on the Engine Block. The Battery Terminals on these cables are brass, as is original. It is also noted that the Battery Positive cable covering is Red and has a Red Rubber Boot installed to protect the Battery Terminal. Price:  $49.95 Quantity: 1960-1965 C-4 WIRING HARNESS Category: ELECTRICAL PARTS Product ID: 65-FAL-N.S.S. Description: This set of wires is used to connect the neutral safety switch on the side of the C-4 transmission to the underdash wiring harness. The set includes 2 pairs of wires, a pair of red with blue stripe for the starting system and a pair of black with red stripe for the back-up lights. Both pairs have the correct colored factory connectors. These wires are approximately 36 inches in length and include the correct rubber boot to install the wires through the floor pan. Price:  $21.95 Quantity: 1960-1964 ALTERNATOR BRACKETS FOR 6 CYL ENGINES Category: ELECTRICAL PARTS Product ID: ALT1 Description: This part will allow you to bolt an alternator onto your 1960 - 1964 6 cylinder engine. It utilizes the original generator bracket mounting holes and properly positions the alternator. Includes the alternator to bracket mount bolt. Price:  $29.95 Quantity: 1960-1970 STARTER SOLENOID Category: ELECTRICAL PARTS Product ID: B5A-11450-A Description: This is the starter relay and will fit all 1960 - 70 models. Price:  $12.00 Quantity: 1960-1965 OIL PRESSURE SWITCH Category: ELECTRICAL PARTS Product ID: B6AZ-9278-B Description: This is the engine oil pressure sending unit and it's purpose is to turn on the low oil warning light when the engine oil pressure drops below a specified level. This part will fit both the 6 cylinder and V-8 engines. Price:  $15.50 Quantity: 1960-1965 INSTRUMENT PANEL VOLTAGE REGULATOR Category: ELECTRICAL PARTS Product ID: B9MC-10804-C Description: This is the instrument panel voltage regulator. It's purpose is to provide a constant voltage to the instruments ( fuel & temp guage ). Since this device feeds both instruments, it's output will affect both gauges in a similar fashion, ie both read high, both read low or neither reads at all. This part is located behind the instrument panel which must be removed for access. You may want to read the correct Troubleshooting Procedures to be certain your current voltage regulator is faulty since there is a NO RETURN POLICY on this electrical item. Price:  $24.95 Quantity: << Previous | 1 | 2 | 3 | 4 | Next >>

Home | Search | Current Order | Wish List