Search for: * in Category: FORD FALCON MOLDING CLIPS 7 Records Returned 7 Records Displayed. New Search

1963 FORD FALCON SIDE MOLDING CLIPS Category: FORD FALCON MOLDING CLIPS Product ID: C2AZ-6229120A Description: This Ford Falcon part is the molding clip used to retain the door and quarter panel moldings on the 1963 Sprint and Futura. These clips fit into the square holes on these panels. The rubber that may be on the original clips is not included on the aftermarket clips. The purpose of the rubber is to keep moisture from entering the mounting holes. We recommend using a dab of silcone or RTV sealant when installing the clips.     To correctly install the clip, place the tabs on the back of the clip into the square hole in the body panel. Using a pair of suitable pliers, squeeze together the 2 small tabs on the front of the clip. This squeezing action will force the 2 tabs on the rear of the clip to expand outward and lock the clip into place. Price:  $2.00 Quantity: 1962 FORD FALCON DELUXE SIDE MOLDING CLIPS Category: FORD FALCON MOLDING CLIPS Product ID: C2DZ-6429120A Description: The rubber that may be on the original clips is not included on the aftermarket clips. The purpose of the rubber is to keep moisture from entering the mounting holes. We recommend using a dab of silcone or RTV sealant when installing the clips.    To correctly install the clip, place the tabs on the back of the clip into the square hole in the body panel. Using a pair of suitable pliers, squeeze together the 2 small tabs on the front of the clip. This squeezing action will force the 2 tabs on the rear of the clip to expand outward and lock the clip into place. Price:  $2.00 Quantity: 1963-1965 FORD FALCON ROCKER PANEL MOLDING CLIPS Category: FORD FALCON MOLDING CLIPS Product ID: C2YY-6210182A Description: This Ford Falcon part are the clips that retain the rocker panel moldings. Six clips are required per side for a total of 12 clips per Ford Falcon. Price:  $2.00 Quantity: 1963-1965 FORD FALCON TOP OF WINDSHIELD MOLDING CLIPS Category: FORD FALCON MOLDING CLIPS Product ID: C3DZ-6303178A Description: 5 REQUIRED Price:  $1.50 Quantity: 1961-1965 FORD FALCON MOLDING CLIP - T-BOLT Category: FORD FALCON MOLDING CLIPS Product ID: C3OZ-6220884A Description: This Ford Falcon part is the T bolt molding clip that fits in the round molding holes of the 1961 Deluxe trim, 1962 Futura and the 1964/65 Futura and Sprint round molding holes. It will not fit other years. The rubber that may be on the original clips is not included on the aftermarket clips. The purpose of the rubber is to keep moisture from entering the mounting holes. We recommend using a dab of silcone or RTV sealant when installing the clips. Price:  $1.50 Quantity: 1961,1962,1964 FORD FALCON MOLDING CLIP Category: FORD FALCON MOLDING CLIPS Product ID: C4DZ-16A076AR Description: This Ford Falcon part is the molding clip to fit in the square body molding holes in the 1961 Deluxe, 1962 Futura and the 1964-1965 Futura and Sprint. Although difference in appearance from the original 1965 clips, it is also a Ford substitute part for the 1965 molding clips.     The rubber that may be on the original clips is not included on the aftermarket clips. The purpose of the rubber is to keep moisture from entering the mounting holes. We recommend using a dab of silcone or RTV sealant when installing the clips.     To correctly install the clip, place the tabs on the back of the clip into the square hole in the body panel. Using a pair of suitable pliers, squeeze together the 2 small tabs on the front of the clip. This squeezing action will force the 2 tabs on the rear of the clip to expand outward and lock the clip into place. Price:  $2.00 Quantity: 1964-1965 FORD FALCON SINGLE SIDE MOLDING CLIP Category: FORD FALCON MOLDING CLIPS Product ID: C4OZ-6221094B Description: The rubber that may be on the original clips is not included on the aftermarket clips. The purpose of the rubber is to keep moisture from entering the mounting holes. We recommend using a dab of silcone or RTV sealant when installing the clips.     To correctly install the clip, place the tabs on the back of the clip into the square hole in the body panel. Using a pair of suitable pliers, squeeze together the 2 small tabs on the front of the clip. This squeezing action will force the 2 tabs on the rear of the clip to expand outward and lock the clip into place. Price:  $2.00 Quantity:

Home | Search | Current Order | Wish List