Search for: * in Category: HARDWARE 44 Records Returned 10 Records Displayed. New Search

<< Previous | 1 | 2 | 3 | 4 | 5 | Next >> 1960-1965 SHOCK TOWER NUT KIT Category: HARDWARE Product ID: 33923-SK Description: This is a set of 6 nuts with attached external star washers for the bolts that retain the upper shock mounts to the shock towers. This is a set of nuts only as the respective bolts are listed seperately. These nuts will fit all models of the 1960 - 1965 Ford Falcons. Price:  $2.75 Quantity: 1964-1965 TRUNK LOCK WASHER Category: HARDWARE Product ID: 34925-S Description: This is the large inside star washer that fits on the trunk lock. Price:  $1.00 Quantity: 1964-1965 TRUNK LOCK NUT Category: HARDWARE Product ID: 351126-S Description: This is the nut that retains the trunk lock to the trunk lid. Price:  $1.25 Quantity: 1960-1964 FENDER BOLT 5/16 - 24 X 1 Category: HARDWARE Product ID: 353483 - S2 Description: This is the fine thread fender bolt found on the 1960 - 1964 models. Although we can provide this fine thread bolt, we can not provide the fine thread nuts. If you must replace both the nut and bolt, we recommend you use the coarse thread type as found on the 1965 models. Price:  $1.50 Quantity: 1960-1970 ARM REST RETAINING SCREW Category: HARDWARE Product ID: 353557-S Description: This Phillips head screw is used to attach the arm rests and is the correct part to attach the arm rests of all 1960 - 1970 Ford Falcon models. Each arm rest uses 2 screws. Price:  $1.00 Quantity: 1960-1965 SHOCK TOWER BOLT KIT Category: HARDWARE Product ID: 355471-SK Description: This is a set of 6 bolts that are used to retain the top shock absorber mounts to the shock towers. These are the bolts only as their respective nuts are listed seperately. Price:  $7.49 Quantity: 1960-1965 WIPER PIVOT SHAFT NUT Category: HARDWARE Product ID: 356094-S Description: This is the chrome nut that fits onto the wiper pivot shaft as it comes through the cowl. Sold individually. Price:  $5.00 Quantity: 1964-1965 LICENSE PLATE BUMPER Category: HARDWARE Product ID: 358159-S Description: This is the rubber bumper that fits into the front or rear bumper of the 1964 - 1965 models to prevent the license plate from rubbing. Price:  $1.00 Quantity: 1963-1970 V-8 AIR CLEANER WING NUT Category: HARDWARE Product ID: 358871-S Description: This is the wing nut for the air cleaner. This part will fit the 1963 - 70 V-8 air cleaner. Price:  $1.00 Quantity: 1960-1970 CAGE NUT Category: HARDWARE Product ID: 359613-S2 Description: This is the cage nut used with the bed screws to hold down the bed insert in the 1960 - 1965 Ford Falcon Ranchero. There are 5 of these cage nuts used across the back of the bed insert. This part is also used on the bottom of the front frame rail to attach the front fenders. One each is required for each front fender. This part is not casually installed especially on the front frame rails. Price is for each. Price:  $2.00 Quantity: << Previous | 1 | 2 | 3 | 4 | 5 | Next >>

Home | Search | Current Order | Wish List