BACK IN THE SHOP. WORKING THROUGH THE ORDERS AS FAST AS I CAN. APPRECIATE THE PATIENCE.

We now stock New Window Regulators for the 1963-1965 Ford Falcon & Mercury Comet Hardtops & Convertibles. $76.95

Welcome!

Register / Login

Shopping Cart

The cart is empty.

{{shoppingcart.totalQuantity}} Item(s) {{shoppingcart.subtotal}} {{shoppingcart.total}} Subtotal

1960-1965 IGNITION SWITCHES
1960-1965 IGNITION SWITCHES

1960-1965 IGNITION SWITCHES

SKU: C3AZ-11572-A
This part will fit all models of the 1960-1965 Ford Falcon & Mercury Comet.  
To replace the lock cylinder, insert the key and turn the cylinder to the accessory position. Insert the end of a paper clip into the small hole in the face of the cylinder. Continue turning the key counterclockwise while gently pulling on the key. The cylinder should come out after the key is turned approximately 1/8 turn past the accessory position. To install the new lock cylinder, index the cylinder so that the key is turned approximately 1/8 turn counterclockwise from the accessory position. You will probably have to insert the paper clip into the hole to turn the key. Insert the lock all the way into the switch and turn the key clockwise until the cylinder locks in place.
If you have an original ignition switch in a 1960 Ford Falcon, we recommend changing both the lock cylinder and switch at the same time. 1960 Ford Falcon is the only year affected. 

 

Price: $16.95